BRAIN2 HD FLYBARLESS SYSTEM WITH BLUETOOTH
The next generation of Brain2 Flybarless systems is here! Featuring 6 different hardware versions optimized for different applications, and robust enough to work in any setup from 180 to 900mm size models.
Some of the exciting new features of the Brain2 system include:
4x faster CPU with increased memory and flash
Logging capability (up to 50hz sampling rate with 10 simultaneous variables)
Built in Bluetooth for connecting wireless to iPhone, Android, or PC (Only on Brain2BT and Brain2BT HD)
In flight vibration logging
In flight event logging
New Rescue feature (auto learning/calibration)
iPhone, Android, or PC configuration/tuning applications
Jeti Transmitter integration (Coming summer 2016)
Of course Brain2 includes the legendary flight performance of Brain1, full governor for Nitro/Electric, and support for most model types. Brain2 is easily configured using the PC application, iPhone, or Android phone/tablets.
INTEGRATED POWER BUS WITH FAIL-ON SWITCH
Brain2 HD includes an integrated power bus with Molex connector allowing a robust connection between the receiver LiPo or BEC. A optional switch is included so that the unit can be conveniently switched on and off. The switch is designed to "Fail-on" such that if it goes bad or is removed power is not interrupted.
4x the performance, 4x storage, hardware acceleration. Ready for years of feature enhancements.
USB POWER CAPABILITY FOR CONFIGURATION
No need to power the model up now to make quick configuration changes or to view flight logs. Just plug in the USB port and the Brain2 powers up, with an integrated diode to prevent powering the servo power bus (no need to take the blades out of the blade holder!).. Quick changes have never been so easy.
Brain2 is always recording the major events during your flight. This lets you go back and review vital information to confirm proper operation or see valuable information to help with troubleshooting
VIBRATION LOGGING, ANALYSIS, AND PLAYBACK
Troubleshooting mechanical problems has never been easier. Brain2 can play back your entire flight showing you vibrations as the model moves through maneuvers. This gives you a greater understanding of the health of the model and points you to the motor, head, or tail sections. Vibration logging can save endless hours of trial and error searching and give you peace of mind that the model is in good health.
Brain2 takes logging and data collection to a new level of capability. Record up to 10 parameters for each flight and download them later for review.
Brain2 provides access to all the critical data parameters visible to the flybarless unit. Some examples include: Voltage, receiver packets, throttle out, RPM, vibration, TX inputs, aileron/elevator rates, tail rate, pitch and more.
This information is incredibly useful for tuning governors on nitro or electric, verifying that your BEC or Rx LiPo is performing how you expect, checking if your radio is working well, seeing the real roll/flip/piro rates, etc.
The logging memory capacity is large enough to hold several flights of information so after a flying session, you can always download the logs for viewing later, or for sharing with other users.
New rescue feature saves the model from any orientation, stabilizing it to hover and adding pitch to avoid any impact with ground. New rescue is a great tool for beginners or for pilots experiencing new manouvers. - See more at: http://www.msheli.com/en/MSHeli-Protos-Flybarless-System/brain-2-flybarless#sthash.p19kaz49.dpuf
The new Brain2 rescue feature saves the model from any orientation, stabilizing it into a hover and adding pitch to avoid impact with the ground. This is an amazing tool for beginners or those working on new maneuvers where there is a higher risk of loss of orientation and control.
USE YOUR PHONE OR TABLET TO CONFIGURE AND TUNE
Ditch your laptop and use the iPhone or Android application to configure your Brain2 flybarless system. Have instant easy access to the entire system at the field or on the bench to quickly change parameters. MSH Bluetooth module is required for Brain2 systems that do not have integrated Bluetooth.
The Brain2 configuration wizard gets you flying fast with default configurations tuned for each model size.
Pull every ounce of performance from your model with Brain2's advanced built in governor. Fine tuned from years of continued development. Utilize the built in logging to tune the governor even further, even if your ESC or Nitro has no native logging ability. Brain2 captures the data you need.
Track the number of flights of the model, but also track the life of individual components, like gears and belts.
Tweak to your hearts content. Brain2 gives you direct access to every tunable parameter in the system. Each parameter includes pop-up instructions to help inform you of how the parameter works. As your flying advances, now so can your ability to tune to your taste. Get every ounce of performance from your machines.
BRAIN2 FEATURE MATRIX