Note: the KDE Direct TREX 550/600 Series Performance Tail Control assembly is the ultimate, slop-free control system
available on the market to provide precise tail control and authority.  Add the KDE Direct TREX 550/600/700 Series
Performance Tail Upgrade V2 to the system and you now have a complete, dual-radial ball bearing supported assembly
throughout for the ultimate flight characteristics.  With the mechanics of the dual-fork supported tail slider, there is no worry
of abnormal wear or torque loads on the tail shaft slider for a continuously smooth, failure-free operation even under the
hardest and most extreme flying conditions.

Includes:
- One (1) TREX 550/600 Series Aluminum Performance Tail Control Assembly
- One (1) TREX 550/600 Series Aluminum Performance Tail Control Secondary Link
- One (1) TREX 550/600 Series Aluminum Performance Tail Control Primary Link
- One (1) TREX 550/600 Series Aluminum Performance Tail Control Arm Lever
- One (1) TREX 550/600 Series Aluminum Performance Tail Control Bearing Holder
- One (1) TREX 550/600 Series Aluminum Performance Tail Control Bearing Collar
- Two (2) Radial Ball Bearings 7 x 11 x 3 mm
- Six (6) Flanged Radial Ball Bearings 3 x 7 x 3 mm
- One (1) M3 x 0.5 x 14 mm Button Head Socket Head Cap Screw (Class 12.9 BP Alloy Steel)
- Four (4) M3 x 0.5 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- One (1) M2.5 x 0.45 x 6 mm Socket Head Cap Screw (Class 12.9 BP Alloy Steel)
- One (1) M3 x 0.5 Nylon-Insert Locknut (Zinc-Plated Class 8 Alloy Steel)
- One (1) TREX 550/600/700 Series Aluminum Performance Tail Upgrade V2  (When Included)
- Two (2) TREX 550/600/700 Series Aluminum Tail Control Link V2
- Two (2) SAE 660 Bronze Bushings 2 x 3 x 3 mm
- Two (2) Radial Ball Bearings 3 x 10 x 4 mm
- Four (4) Flanged Radial Ball Bearings 2 x 5 x 2.5 mm
- Two (2) M3 x 0.4 x 12 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M2 x 0.4 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M3 Flat Washers (Zinc-Plated Alloy Steel)

Finish:
Clear anodize, mirror-polish CNC gloss

Weight: 
8 g (design is FEA optimized for maximum strength and minimum weight)

Important: due to the precision CNC-machining of each component,
correct installation is key for proper, bind-free operation.  Please pay
attention to the Installation Instructions, take your time during the install,
and make sure to apply medium-strength Loctite (Blue 243 or equivalent)
to all screws during assembly.  Once fully-installed, a significant reduction
in slop throughout the tail mechanics will be clearly evident on the bench
and in actual flight.