Align T-REX 450 has been the ideal choice for entry level R/C helicopters. To cater to new RC helicopter enthusiasts, Align introduced T-REX 450LP ARTF (Almost Ready to Fly)*, complete with newly released Align A10 transmitter and Mini GRS flybarless system. This combination allows new enthusiasts to spend more time flying, rather than countless hours of guess work and building.
The helicopter utilizes DFC (Direct Flight Control) rotor head, paired with Mini GRS flybarless system optimized for T-REX 450LP flight characteristics. It provides excellent stability suitable for pilots of all levels.
Equipped with digital high voltage servo DS450 and DS455, supports 8.4 high voltage to provide optimal speed and torque performance. Paired with the new RCE-BL45P ESC, supports adjustable 5~8.4V BEC function to highly improve flight performance.
ALIGN A10 is AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz transmitter provided with 10 channels. The stick and holder are designed based on ergonomic bringing much smoother control. Completed function with the mode of helicopter / aircraft / multicopter. Logical and simple control interface, and easy to set up.
With the addition of the brand new Align A10 transmitter and Mini GRS, the T-REX 450LP ARTF pushes past the performance limitation of flybar helicopter, improving both on stability and 3D performance, while maintaining a down to earth price level.
•Operating voltage range: DC 3.5~8.4V
•Operating current consumption: <100mA @ 4.8V
•Rotational detection rate: ±300°/sec
•Rudder yaw detection rate: ±600°/sec
•Sensor resolution: 12 BIT
•Swashplate Support: 120° CCPM Swashplate
•Mode Support: T-REX250, T-REX450, T-REX470, T-REX500
•Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX
•Operating temperature: -20? ~ 65?
•Operating humidity: 0% ~ 95%
•Comply with RoHS
•Available Models: helicopter/airplane/multicopter
•Frequency range: 2.4055 ~ 2.475 GHz
•Power: no higher than 20dBm
•System Mode: 2.4G system AFHDS 2A
•Suitable Voltage Range: 4.0 ~ 6.0V DC
•Receiving Distance: the open ground no interference < 1000M
•Low Voltate Warning: Lower than 4.2V
•Weight: 487g (excluded battery)
Balance Charger RCC-3SX Specification
•Input Voltage: AC 100V~240V(50/60Hz)
•Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
•Supported Battery Type: Li-polymer / Li-ion
•Charging Method: CC/CV
•Charging Current: 2A
•Output: 11.1V 2200mAh 24.4Wh(3S1P)
•Supports 5C charging
•14AWG heat-resistant silicone rubber wire. Heat resistance: 200 ° C / Current withstand: 50A
T-REX 450L Specification
•Main Blade Lenght: 325mm
•Main Rotor Diameter: 734mm
•Tail Rotor Diameter: 171mm
•Motor Drive Gear: 11T
•Main Drive Gear: 121T
•Autorotation Tail Drive Gear: 106T
•Tail Drive Gear: 26T
•Drive Gear Ratio: 11:1:4.07
•Weight(w/o battery): 730g
•T-REX 450L Kit Set x 1 set
•MINIGRS Flybarless System x 1 set
•A10 Transmitter x 1
•325 Carbon Fiber Blades x 1 set
•RCE-BL45P ESC x 1
•460MX Brushless motor(3200KV/2222) x 1
•DS450 Digital servo x 3
•DS455 Digital servo x 1
•3S1P 11.1V 2200 mAh/30C Li-polymer Battery x 1
•Balance Charger RCC-3SX x 1 set
•1.5V AA Zinc-Carbon Battery x 4
Radio transmitter and electronic equipment required for assembly:
1.Dial Pitch Gauge or Digital Pitch Gauge
*User is required to install tail assembly to the body of the helicopter and reconfirm set-up before flight.